OMTech CO2 laser engraving and cutting machine

Is It Worth the Journey to See a Laser Running Before You Buy?

Seeing a CO2 laser running before you buy shows you what spec sheets and videos can't: how big the machine is, how solid it feels, what the cooling, extraction and air assist add, and how it handles your material. That is why some of our visitors make round trips of hundreds of miles to our workshop in Buckley, North Wales.

Why see a laser in person before you buy?

You can spend weeks reading reviews, watching videos and comparing spec sheets, and still not be certain. A photo can't tell you how solidly a machine is built, how it handles, or whether it's the right fit for the job you have in mind. Ten minutes with the real thing can settle a decision that weeks of online research couldn't.

It also matters because a laser is rarely bought on a whim. Some visitors plan the trip days in advance and set off early to beat the traffic, so we want the time to be useful: real jobs, straight answers and no pressure to buy.

What you can only judge in person

  • Size. These machines arrive crated on a pallet, and they're bigger than the photos suggest. Seeing one helps you judge whether it will fit your space and the route in.
  • The whole setup, not just the laser. A CO2 laser works alongside a chiller, an extractor fan with ducting and an air assist pump. You see them all running together, and how they fit around the machine.
  • Build quality. You can look at the frame, the gantry and the lid for yourself, on machines that have run in daily commercial production since January 2023 and June 2024.
  • Your own material. Bring a sample of the wood, slate, acrylic or whatever you plan to use, and we will run a test on it while you watch.
  • Real work, not demo mode. Our two OMTech CO2 lasers, both sold to us as 80W, run production jobs every day, using LightBurn from file to finished piece. They cut and engrave FSC-certified oak veneered MDF and FSC-certified Moso bamboo (certificate BV-COC-190523), and engrave natural slate, which a CO2 laser can engrave but not cut.

What visitors ask

Some questions come up again and again, in the workshop and in messages:

You can also ask about running costs, maintenance, ventilation and fume extraction, software and material settings, and what it is like to run one of these machines commercially. For the numbers, our post on real running costs from our workshop since 2023 covers tubes, power supplies and repairs: they are consumables, like tyres on a van.

Is the journey worth it?

If you are close to buying and still unsure, a visit is a small cost compared with buying the wrong machine. If you live further away, the guides above cover much of what visitors ask, and you can email questions before deciding whether to travel. If you do come, bring the measurements of your space and a sample of your material, so you leave with answers about your own setup rather than ours.

How to arrange a visit

Visits are free, informal and by appointment only. Email info@cherrygrovecraft.co.uk with a couple of dates that suit you, and Pete will confirm a time; the full address comes with the confirmation. Buckley is a short drive from Chester, Mold and Deeside. Everything else you need is on our OMTech showroom page.

When you are ready to order, our OMTech discount code takes 4% off at omtech.uk (checked October 2026), whether you have visited or not.

Frequently asked questions

Do I need to book before visiting the OMTech showroom?
Yes. Visits are by appointment only: email info@cherrygrovecraft.co.uk with a couple of dates, and the full address comes with Pete's confirmation.

Is there any obligation to buy a laser if I visit?
No. Visits are free and informal, and there is no obligation to buy, through us or anyone else.

Can I test my own material during a visit?
Yes. Bring a sample and we will run a test on it while you watch. PVC and anything containing vinyl can't go in a laser, because the fumes are toxic and corrosive.

Which laser machines can I see at the showroom?
Two OMTech CO2 lasers with 700 × 500 mm beds, both sold to us as 80W (the newer one is a Turbo-758, which OMTech now lists as 90W), running real production jobs. It is a working workshop, not a showroom with a full range of models.

Disclosure: as an official OMTech showroom, we earn a commission from OMTech on purchases made with our code or link. The 4% discount comes off your price either way.

Sources

Back to blog