OMTech Showroom Buckley, North Wales - See a Laser Running Before You Buy

Cherry Grove Craft in Buckley, North Wales, is an official OMTech showroom where you can watch two OMTech CO2 lasers run real production jobs before you buy a laser. Visits are free, informal and by appointment only: email info@cherrygrovecraft.co.uk with a couple of dates. Buckley is a short drive from Chester, Mold and Deeside.

This is not a sales floor. It is a working laser engraving workshop, and the OMTech machines on show are the ones we use for production every day.

What you will see

Two OMTech CO2 lasers with 700 × 500 mm beds, both sold to us as 80W (OMTech now lists the newer Turbo-758 as 90W), running real jobs: cutting and engraving oak veneered MDF and bamboo, and engraving slate, with the full LightBurn workflow from file to finished piece. Real results on real materials, not demo-mode samples.

What you can ask

Anything. Running costs, maintenance and consumables, ventilation and fume extraction, software, material settings, and what it is honestly like to run one of these machines commercially. If you are starting a business, we will tell you what we wish someone had told us.

Bring your own material

Planning to work with a particular wood, slate, acrylic or anything else? Bring a sample and we will run a test on it while you watch. It is the quickest way to find out whether the machine you have in mind will do the job you need.

Before you visit

  • A sample of your material, ideally an offcut you don't mind us cutting. We won't test PVC, vinyl, neoprene, PTFE (Teflon), ABS, polycarbonate or anything we can't identify: some give off toxic, corrosive fumes and others burn rather than cut. Vegetable-tanned leather is fine; avoid chrome-tanned leather and most faux leather (often PVC).
  • A rough idea of what you want to make, and roughly how many. It changes which bed size, extraction and cooling make sense.
  • Measurements of your space: where the machine would go, the route in (doorways, corners, steps) and where ducting could exit. The laser is only part of the footprint; the chiller, extractor fan and air pump sit alongside it.
  • Your questions, written down: for example how long tubes and power supplies last, what a chiller and extraction add, which software to use, and what settings suit your material.
  • If you already own a laser: its make, model and wattage, and a few photos of your setup.

How to book

Visits are free, informal and by appointment only. Email info@cherrygrovecraft.co.uk with a couple of dates that suit you, and Pete will confirm a time. We are in Buckley, North Wales, a short drive from Chester, Mold and Deeside, and the full address comes with your confirmation. There is never any obligation to buy, through us or anyone else.

Guides for laser owners and buyers

Everything below is written from our own workshop.

Choosing a machine

Setup and first days

Maintenance and running costs

Starting a business

The OMTech discount code

Whether you visit or not, our showroom code Cherrygrovecraft takes 4% off at omtech.uk (checked October 2026). See our OMTech discount code page for how to use it.

Frequently asked questions

Is a visit to the OMTech showroom free?
Yes. Visits are free, informal and by appointment only. Email info@cherrygrovecraft.co.uk with a couple of dates and Pete will confirm a time.

Do I have to buy a laser if I visit?
No. There is no obligation to buy, through us or anyone else. If you do buy at omtech.uk, the code Cherrygrovecraft takes 4% off (checked October 2026).

Can I bring my own material to test?
Yes. Bring a sample and we will run a test on it while you watch. We won't test PVC, vinyl, neoprene, PTFE, ABS, polycarbonate, chrome-tanned leather, most faux leather or anything we can't identify.

Where is the OMTech showroom in North Wales?
In Buckley, Flintshire, a short drive from Chester, Mold and Deeside. The full address is sent with your booking confirmation.

Can you help with a laser I bought elsewhere?
You are welcome to ask. Our first-hand experience is with OMTech CO2 lasers and LightBurn, so tell us your machine's make and model when you email and we will say honestly what we can help with.

Disclosure: as an official OMTech showroom, we earn a commission from OMTech on purchases made with our code or link. The 4% discount comes off your price either way.